 |
 |  |  |
 |
|
Services
Damaged
boards are replaced or repaired using Lercol a professional cellulose
mixed with sawdust which when sanded matches the floor boards. Large
gaps can be filled with strips of wood. All nail heads are then knocked
in below surface level and any staples removed. Sanding then takes
place using progessively finer grit. The edges are sanded with a
different machine and finally the corners are sanded with a small
corner sander.The floor is then hoovered and 1 coat of Bona primer
applied to bring out the colour in the wood. 2 coats of Bona Novia
Lacquer are then applied. The floor is finely sanded again between
these coats..Finish can be either matt or satin matt.
Conditions
Prior to sanding the room needs to be cleared of furniture and any old floor
covering. All plumbing and electrical work should be completed. 2-3 days per
room should be allowed. I do not sand stairs. Hallways are uneconomic to sand
alone and will be only be done with another room.
Equipment used is a
Lagler Hummel dust free belt sanding machine and Lagler Unico edge sander. These are much cleaner machines and give a far better finish than the machines available from hire centres.
|
|
 |
|
|
